Product Categories

Shopping Cart

200L Test Pond

200L Test Pond 2017-09-19T10:47:23+00:00

200L Base Pond Kit Includes:

  • ​Fiberglass pond with pressure treated wood base
  • ​​Stainless steel, bent-blade paddlewheel
  • KB Genesis KBDA24 Variable frequency drive
  • ​IPTS IBLCS 50-100-56C Marine gearbox
  • ​Leeson 191202 stainless steel, wash-down grade three phase 1/3 HP motor
  • ​Comes with Milwaukee pH monitor and control system (upgrades available, see below)

Optional Components:

  • YSI 5200A-DC Water Quality Monitoring System​
    • ​Basic Parameters: pH, dissolved oxygen, conductivity, temperature, and ORP
  • ​Neptune Systems Water Quality Monitoring System
    • Parameters available: pH, ORP, conductivity, temperature, dissolved oxygen
  • Quantum Pyranometer
  • ​Nutrient mixing and delivery systems
  • ​Ultrasonic or Mechanical water level control and monitoring
  • ​Ethernet / WiFi interface
  • Dissolved CO2 monitoring, data-logging and pH control
  • ​​Splash guard and OSHA compliant shield
  • ​PC based data logging, graphing, and exporting data files

Call 828-634-0451 For Information On Packages and Available Discounts!

These pond systems can be used in indoor or outdoor environments.
Operating temperature range is 1C to 55C ambient temperature.
Non-operating temperature range is -20C to 70C with proper preparation.

Height With base to pond wall top 34” approx. to blade tip clearance 58”
Without base to pond wall top 16” approx. to blade tip clearance 40”
Pond Length Approximately 60”
Pond Width Approximately 24” , with motor/gearbox/plate 32” approximately
Water Volume (approximate volumes) 65L @ 3”/ 130L @ 6”/ 195L @ 9”/ 260L @ 12”
Water level range 3” / 8 cm to 14” / 35 cm operating depth (splash guard required for water depth above 12” / 30cm)
Water flow rate Controllable range dependent on water level and wheel speed (approx. 10cm – 1m/sec. avg flow rate)
​Water connection Standard hose bib connection or ¾” PVC plastic pipe
Electric connection 110VAC – 60Hz, 7 amps, 3 prong with ground. (Separate earth ground recommended but not required)
Gearbox oil Below 25C Ambient Temp – 460XL Synthetic Gearbox oil / 25C or higher Ambient Temp – 680XL Synthetic Gearbox oil
Drain connection 1/2 “ PVC slip fitting, Can optionally be equipped with 1 ½” or 2” Camlock fittings